Goat Moth - a spectacular caterpillar

Caterpillars can be some of the most spectacular and pretty creatures that we can encounter here in France and the caterpillar of the Goat moth, (Cossus cossus), is a classic example and it's the caterpillar that gives this moth its name as it emits a strong and rather unpleasant smell reminiscent of a male goat although having handled a few I’ve never been aware of it myself. 

The moth has a wingspan of 9cm or so, have light grey wings which are covered in black speckles.  Sadly I have never seen one and it may well be that there aren’t many where I live, (my wife did see a caterpillar about 10 years ago on a nearby track but nothing since), however this isn’t so unusual as apparently they aren’t regularly observed and the moth doesn’t feed. By all accounts they aren’t a common species and as we will see the larvae are regularly destroyed which may account for their decline.

Twice a year in May and October Hope Association holds a three day fund raising event at Clussais La Pommeraie in the Deux-Sevres departement of France where I have a table selling my honey. Some years ago my attention was drawn to a caterpillar someone had found and it was unmistakably that of a Goat moth that seemed likely to have emerged from a large Oak tree that is directly in front of the building that is used for the event. The tree had some damage in the form of exit holes but not a huge amount but this year when I was there a few days ago there was sawdust all over the ground at the base of the tree and clinging to the bark. Of course it’s probably nothing different from any other year except that this year we haven’t had any significant rain to wash it away. 

“”The eggs are laid, usually in small batches, in crevices or on bark of living trees near old burrows or other damage. Young larvae enter the tree, at first remaining under the bark, later boring deep into the wood on which they feed. The slow-growing larvae do not become fully grown until the third or fourth year. The burrows of the fully grown larvae are circular in cross-section and up to 20mm in diameter. Sap often seeps from the holes the larvae make at the trunk’s surface, with frass ejected from these, often accumulating at the base of the trunk. Trees can support one, a few or perhaps many larvae. Severe infestations can kill the tree, but this may take several years. In their final autumn, from August onwards, some larvae leave the tree, hibernating in a silk-lined cell in the ground. Other larvae remain in the tree. Pupation takes place in April and May, the larvae in the tree making an exit ‘window’ in the bark by gnawing away all but the outermost surface before making a silken cocoon in which they pupate.”” 

(Source: Butterfly Conservation.org)

There is no doubt that they can cause serious harm especially to fruit trees, usually older ones that have surface injuries and are considered to be an agricultural pest in orchards however in the case of large oaks the tree should be able to support their presence in the same way they do the larvae of Cerambix cerdo - Le grand Capricorne. 

A few photos of the tree concerned and one of the caterpillars from it. Click on photos to enlarge.

Chris

A few French frogs and newts at Chaunay.

When the LGV from Tours to Bordeaux was being constructed there were a large number of environmental impacts that had to be considered as a matter of law these days and I will go into them at a later date. Here I only want to touch upon one site, Le bocage humide de Chaunay a wetland site site in the south west of the Vienne departement of some importance.

All in all at this site some 120 hectares were purchased by Réseau ferré de France, (RFF), which is the company that owns and maintains the French national railway network.  The land is comprised of moderately managed small copses and hedged fields that have been cut for hay. It’s something of an exception among the wetlands of the department. With no connection to any river an alluvial aquifer feeds directly into the pools and ditches creating large area of seasonal surface water. With a handful of man made ponds left in existence another 7 have or are being created on the 45 hectares that have been contracted to CREN, (Conservatoire d’Espaces Naturels de Poitou-Charente), for 25 years. CREN in turn are establishing a management plan with farmers that use the land regarding types and timing of any hay cutting that will take into account the various species present.

The site is particularly rich and includes some of the rarer and endangered amphibian species that have been lost in huge numbers due to the vast destruction of ponds and habitat throughout the region over the last 50 years or so.  I bet like me you must get sick of hearing this, everywhere we look it’s the same old story and sadly not getting any better.

Anyway, on a positive note this particular site is relatively safe although there are some issues that will be difficult to resolve as we shall see.

When observing or compiling records for amphibian species at any given site it’s necessary to do this at night essentially combining two different means. The first is to listen and identify any of the frog or toad species present. To do this, having approached the pond, we then turn off all lights and wait 5 minutes as little by little they settle down and get back into their calling. As with most other creatures each species has its own unique call and for some it may be the only way we can determine their presence.  

Next it’s light and time for a careful search in the shallow margins. The water will be slightly warmer here and it’s where mating takes place for most amphibians. For many species there is no need to actually capture them, simple observation is enough, indeed strictly speaking it’s illegal to capture them without being authorised and absolutely illegal to deliberately harm or move one.

Of particular interest is the Triton de Blasius a hybrid newt that results from the mating between a male Great Crested Newt, (Triturus cristatus), and a female Marbled Newt, (Triturus marmoratus), which obviously requires the prescence of both species. Biologically the males are sterile and females only partly fertile. There is no typical Blasius but the essential features are the back with the markings of a Marbled Newt and the belly of a Great Crested Newt.

Click on photos to enlarge.

Photos below of Triton de Blasius.

Photo below of Male Common tree frog 

Photo below of an Agile frog

Photo below of Female Palmate Newt

Photo below of Female Great Crested Newt

Other species are also present at the same site - Marbled Newt, Common toad and Parsley Frog. 

There remains as I mentioned one not so small issue and that is the presence of Procambarus clarkii, Red Swamp Crayfish  an introduced species from the USA. This species can reach 85-90mm total length and are aggressive in behaviour presenting a threat to the native amphibian species that are there. Due to  the protected nature of this site only authorised trapping can take place but as it is a species that will move through ditches and indeed overland in wet conditions total eradication is unlikely. 

 Photo below  Procambarus clarkii, Red Swamp Crayfish

Chris

Having honey bees without keeping them.

There appears to be more and more people that just want to have some honey bees in their garden or on their land. These same people are often met with a barrage of it isn’t possible, they will all die, you need to be trained, (like a donkey?), or you will be spreading disease and every other evil that paranoid beekeepers can dream up to protect their image of being masters of their craft and keepers of the grail. Fortunately not all bee keepers are that precious or narrow minded.

   

However would it surprise you to know that actually it’s perfectly possible and reasonable to have honey bees without playing with them?

LINK HERE Having honey bees without keeping them.

Hope you enjoy it, Chris

Snakes and their names in France

This comes up in questions and conversation all the time and frankly there isn’t much point asking your neighbour, in fact mentioning snakes isn’t a good idea unless you want to run the risk of being treated to a diatribe on how they should all be killed.

There is a lot of confusion caused for English language speakers by the translations of French to English for snake “prefixes” resulting from historical errors that have never been corrected since the first dictionaries which have been copied ever since. These are the common or vernacular names in normal usage although again it’s unlikely that most French people know them.

Couleuvre is often thought to mean “Grass snake” but in fact it is used for a group of snakes in France, 6 in all, that reproduce by laying eggs, and are all but one harmless and non venomous.  

The snakes are. 

Couleuvre à collier – Grass snake

Couleuvre à échelons – Ladder snake

Couleuvre d'Esculape – Aesculapian snake

Couleuvre verte et jaune – Western whip snake

Couleuvre vipérine – Viperine snake

Couleuvre de Montpellier – Montpeiier snake, (venomous but with non retractable rear facing fangs at the rear of its mouth - generally harmless).

Coronelle, which won’t often be heard, is used for 2 species of snake in France that are harmless and non venomous, one, the Southern Smooth snake lays eggs and the other, the Smooth snake is “live bearing”, that is to say although not giving live birth in the standard sense it is when the babies hatch inside the mother and are then released to the outside world and can immediately fend for themselves.

The snakes are.

Coronelle de Bordeaux - Southern smooth snake

Coronelle lisse – Smooth snake

Vipère which are the true vipers, they are venomous, potentially harmful and have retractable forward facing fangs and are also “live bearing”.   

The snakes are.

Vipère aspic – Asp viper

Vipère péliade – Common Adder

Vipère d'Orsini - Orsini's viper

Vipère de Seoane (Vipère des Pyrénées) - Seoane's Viper

More see HERE.

Chris

Ponds in Poitou-Charentes France

Ponds in Poitou Charentes from an article in Living Magazine.

Living in this part of France with water on demand at the turn of a tap, it’s easy to forget that as little as 20 to 25 years ago there were many people in small hamlets that only had the well to supply their needs. Pumped domestic water for many is a relatively recent phenomenon in rural France. The further we go back, the more people depended on other means to provide and store water for themselves and their livestock which included different types of ponds, troughs and containers depending on the purposes they would be required for. In turn, these often provided an important habitat for a range of species, amphibians, reptiles, insects and plants. Sadly, many have been lost for one reason or another or have been altered to satisfy our desire for ornamentation.

Read the full Article here. 

Winter bee colony mortality rates.

A couple of interesting maps from the studies carried out for the European Commission certainly throw up more questions than answers.

Why should the UK suffer nearly 30% winter losses in the winter of 2012/2013 when in the same winter France only recorded losses of 14.2%, Germany 13.3% but Belgium an astounding 32.4%?  

From my own perspective anything around 15% could be considered normal with colonies that are not heavily manipulated.

Anyway, here are the maps and also a link to the document and other downloads.

Click on maps to enlarge.

2012/2013 

2013/2014 

LINK TO DOCUMENT HERE.

Chris 

Soya bean cultivation in France

As if things weren’t bad enough already Soya seems set to be the latest money generator for the people that exploit the cereal lands of France 

Click on photos to enlarge

It was some 30 years ago that Soya bean trials were first made in my region of Poitou-Charentes but at that time it wasn’t economically worthwhile and it was cheaper to import from abroad. As the dominate producers, (Brazil, Argentina and the United States), moved to growing Genetically Modified Soya and imports swelled as a result of an ever increasing demand from the industrial production of both meat and poultry some thought there was an opportunity to try growing Soya again. With this in mind Eric Simon of the animal food manufacturer Alicoop, Pamproux along with some others approached Ségolène Royal, (then President of the Region), to provide assistance via additional Regional subsidies alongside those available from the CAP, (Common Agricultural Policy), for this crop. With the market price and subsidies combined it’s more profitable than sunflowers and in a couple of years regional production has exceeded 2000 hectares and is set to grow exponentially.

On the plus side it is a crop that like sunflowers can manage without irrigation. It also has no requirements for fungicides or insecticides, fixes nitrogen from the air in its root nodules and provides an alternative to the Genetically Modified alternatives that are imported, all of which in different circumstances would deserve our support.

So what’s the problem?

The simple answer is the vexed issue of the continuing decline of pollinators as a result of every last piece of half viable land being turned to the plough which was already bad enough in itself but it did at least have the small virtue of sunflowers that have usually been grown as the 4^th crop that has to make up no less than 5% of the land surface of any given crop producer. If Soya replaces Sunflowers, of which there is every likelihood, it will leave much of the French countryside almost devoid of food in the summer for bees whether they are Honey bees, Bumble bees or Solitary species. The one thing Soya doesn’t have is flowers that open, they are small, remain closed and internally self pollinate. Add this to the other crops that are already grown over the largest land areas, that are wind pollinated and have no nectar, wheat, barley and maize and it’s clear that it’s an expanding “green desert”, pleasing on eye to those that don’t understand but a catastrophe for our pollinating insects.

Chris

The so called Flow Hive.

As this is a subject that isn’t going away and keeps being brought to light, (usually but not always by people that have little or no experience of keeping bees), I thought I should attempt a response of my own that I can use as and when required that makes my position and views clear.

   

Firstly for people that have no practical experience of beekeeping it should be noted that the structure that matters in this instance it isn’t actually a hive but what we beekeepers call a “super” in English or la hausse in French. This is a supplementary box that goes on top of a hive to enable the beekeeper to collect honey that is in excess to the colonies requirements. The fact that they can also supply a hive to go with it is neither here nor there as it’s the supplementary box and its constituent parts that are different. This supplementary box for honey production is usually separated from the hive proper with a grill that keeps the Queen in the hive itself.

My first objection may not seem very important to some people and that is that the device relies on artificial pre-formed honey comb structures made entirely from plastic when the natural situation would be bees making comb with their own wax.

These plastic frames are designed to shift vertically along the center (or midrib) of the honeycomb structure. This is operated by turning a key that shifts the midrib breaking open the back of the cells containing honey which then theoretically drains backward, drips down the back of the plastic frame and is captured in a trough that leads to a tube that drains to the outside and into your jars or other containers of choice.  Once the comb is drained, you turn the key again which shifts the comb back into its original position when the bees supposedly chew open the wax seals on the front of the comb and refill them assuming somehow the bees know that the cells have been emptied from the back?  All of this is achieved without removing the lid or removing and exposing the comb and bees to the air.

All sounds wonderful but then the sales spin always does.

The first thing is that honey cells need to be filled and sealed with wax by the bees before the honey is ready to be extracted and stored. Taking honey before this has happened will usually mean that the water content is too high thus leading to fermentation, (more than 19%).

Now they make much of how kind this system is to the bees because there is no requirement to remove the lid and remove the frames. They claim that it’s possible to see if the cells are sealed simply by looking through the glazed side but anyone with experience will know this simply isn’t true. As you can see from the photo the faces of the frames simply aren’t visible even from the top with the lid removed which means the frames have to be lifted out to see the entire faces.

Another concern for me is honey robbing.  Pictures on the Flow™ Hive site also show honey dripping from the hive into open jars with no bees in evidence when in reality any source of exposed honey would immediately attract thousands of bees and potentially trigger a robbing frenzy as other hives in the area rapidly discover free open air honey. Either way, you wouldn’t be sitting there with open honey without there being bees all over and in it. Anyone that doubts this should stand by a hive with a teaspoon of honey and watch the speed with which bees arrive.

Then there is the not so small matter of the nature of the honey and whether it would actually just run out or not. Again anyone with actual experience of keeping bees in most European countries will know that there are some types of honey, perhaps the majority, which simply won’t. Indeed there are some that can’t even be extracted by spinning out of the frame if they start to set in the frame, Oilseed rape being one of them which requires very precise timing for extraction and Heather honey is thixotropic and cannot even be spun out from the combs in an extractor and is usually pressed. These will clog and jam the mechanism requiring the Flowhive frames to be removed and cleaned with hot water.

Price?   Well if you want to spend over 500 US$ for a 7 frame flow hive when you can buy a regular Super with 9 waxed frames for €30 you must have money to burn.

So what if any are the benefits?

Zero as far as I can see, it won’t be less intrusive or kinder to the bees that much is clear and the super with the Flow frames will still need to be frequently removed, emptied of bees and cleaned. If your reason for buying this is because you are afraid of bees or you think it will make it easier you are mistaken.

If you really are determined to try one I reckon that if you wait there will be a glut of them on the market at knockdown prices when people realise they aren’t all they are cracked up to be, or on the other hand I may be wrong. 

Chris

Trapping Asian Hornets

You would be forgiven for thinking that people that keep bees would be concerned about the environment and the general well being of all creatures. Sadly this is often not the case; indeed many bee keepers make a living as so called pest destroyers.

Anyway as they say “The road to Hell is paved with good intentions” and in this case bee keepers, bee keeping groups and other wildlife groups have been extolling the virtues of trapping Asian Hornets, especially in the early spring when the new queens are coming out of hibernation without thinking or considering the repercussions.

The traps that are usually based on the principle of a plastic bottle with a small entrance, often the inverted neck of the bottle, are suspended with a quantity of attractant added. There are various mixtures used but Brown beer, Cider and Cherry syrup mixes seem to be favoured, the argument being that this won’t attract honey bees. It will however attract European Hornets and our native social wasps which are suffering enough already and generally in decline even if you may not think so if you are at place where people are congregating to eat and consume sugary drinks in summer. Of course other insects and flies will also be drawn to the traps and suffer an unnecessary slow death. All of this shows a remarkable ignorance of the current situation of insects decline that is having a devastating effect on our wildlife. 

Of course there are selective ways to kill Asian Hornet Queens in the early spring but they require a little effort, but in my opinion that effort is well worth while if it means protecting our native species.

In early spring Bee keepers or individuals can try to kill as many Asian Hornet Queens as possible by hand. They will be easily lured to the slightest scent of honey and I find swatting them with a plastic tennis racket is the easiest method and we can then avoid killing European Hornets and other wasps. 

ASIAN HORNET

Chris

Deaths head hawkmoth and Great Peacock moth.

OK, size isn’t everything but the two largest moths we find in France are quite spectacular in both adult form and caterpillar and as such I think are worth a mention, they rarely fail to rise a "wow" when someone finds one.

The Great Peacock Moth Saturnia pyri is the larger of the two and is Euorope largest moth with a wingspan of between 100 and 150mm, (4 to 6 inches), although some texts suggest that 200mm, (8inches), is possible.

Click on images to enlarge

Great Peacock Moth on my hand

   

This is a species with only one generation a year with the adults usually emerging from mid April to mid May when they devote their short life entirely to reproduction as they live for perhaps 7 days and have no requirement to take nutrition.

Pair of Great Peacock Moths mating

Specifically a virgin female finds a place in a bush or tree where she emits nightly sex pheromones which diffuse into the air which can be picked up by males from as far as 5 km who will home in on the scent, however only one male will get to mate with a female as coupling signals the end of the pheromone emissions and sexual attraction.

It's always worth looking at any outdoor twine door curtains for eggs.

Due to the lack of time the female who is already bursting with eggs will often lay them in the tree where she is as soon as they are fertilised which is like as not in close proximity to where she emerged from her chrysalis or cocoon which may even be the tree where she was an egg herself. In some ways it’s of little importance as the caterpillar will happily use a vast range of deciduous trees.  The caterpillar goes through 4 stages over 35 days before pupating and changes both body colour and the colour of the tubercles.

Caterpillar 1st stage, (Ardèche), Photo Daniel Morel.

Caterpillar last stage

They are to be found more or less all over France if there are trees although there are far fewer towards the north.

The next largest moth is the Deaths head hawkmoth, Acherontia atropos, with a wingspan of 90–130 mm (about 3.5 to 5 inches), which makes it the largest European Hawk moth, (Sphingidae).

Deaths head hawk moth Photo Philippe Mothiron.

Unlike the Great peacock this is not a French resident as such, (yet), but a migratory species par excellence from North Africa where it uses its huge wings to be carried on the air currents across the Mediterranean Sea. 

Generally the immigrants arrive in May-June and will reproduce in the warmer south of the country where a second generation may be produced in September or October. The caterpillars live for 3 to 5 weeks and the pupal stage can last for about 3 weeks or so.  Adult moths live for around 6 weeks and feed on plant and tree sugars, sugars from fallen fruits and of course most interestingly they can enter honey bee colonies and take uncapped honey even though they are attacked by guard bees at the entrance to some extent but not seriously, however the thick cuticle and resistance to venom allow them to enter the hive or other colony space. Apparently they are able to move about in hives unmolested because they mimic the scent of the bees. I’m not really sure how this works as each colony has its own unique scent.

Caterpillars go through three stages, feed principally on various nightshades, are frequently found on potato plants and can emit a loud click.

Death head hawk moth caterpillars

Caterpillars from the second batch will find it hard to pupate and even if they do they won’t survive the winter frosts.

Showing the skull like pattern on the thorax

The moths name is arrived at by the skull like pattern on the thorax and it’s another species that was considered to be evil or a harbinger of death. In France they were quickly dispatched and treated with Holy water. What with that and pesticides used these days on potato crops they haven’t had an easy time and numbers have reportedly fallen significantly although if there are declines in numbers we would probably have to look to Africa and the situation there.  On the plus side, this year has been exceptional in France with larger numbers of sightings of second generation caterpillars following a very mild winter and a warm, dry spring and summer although again we should be cautious as the growth of social media and abundance of modern phones with cameras may simply be bringing to light larger numbers that would otherwise be missed. 

Chris

Bee swarms in French windows and removing them.

This year, as is the case every year, I was called to several houses to remove honey bee colonies that had set up home between their windows and closed shutters. 

This is a very common occurrence here in France whenever houses are left unoccupied for any length of time in the swarming season with the shutters closed, (mainly end of April until the end of June). Scout bees find what for them looks like a great place to set up home and if it wasn’t for the humans it would be. Unfortunately when the humans return to their holiday home or back from a couple of weeks away they find their uninvited guests where they don’t want them to be.

Although this isn’t an ideal situation, unless of course you are happy to leave your shutters permanently closed and enjoy the watching the bees, it isn’t an impossible one providing you can find someone competent to re-home them as quickly as possible. Every day that passes makes it harder on the bees and more difficult for the person removing them; anyway I thought I’d share this one as an example to give some idea of what is involved in a sensitive removal.

I arrived at this house at about 2.30pm in late July having been contacted by Malcolm Harding the key-holder keeping an eye on the property. Doug Hart, bee keeper friend who owns a house locally who was going to give a hand and observe arrived later. The owners of the property were in the UK and the house was on the market to be sold which meant the colony had to be removed to prevent deterring prospective purchasers. As can be seen it was a sizeable colony and well established, probably between 2 and 3 months.  

Click on images to enlarge

 Honey bee colony in the window from the inside.

Number one issue was that the shutters lock from the inside for rather obvious security reasons and couldn’t be opened. Number two issue was that the windows were stuck firmly closed by the wax and wouldn’t open inwards. Solution simple enough – smash a pane of glass to reach in and release the shutter bolt that was just clear at the bottom of the comb. Having done that it was possible to carefully prise the shutters open and mercifully they opened with a clean break to the combs where they were attached near the top leaving the colony nicely exposed ready for removal.

The honey bee colony nicely exposed. 

The principle difficulty in almost all cases apart from a very recently started colony is that a large part of the comb structure is filled with honey. As soon as this is handled honey starts to go everywhere and I try to make every effort to reduce the number of bees that end up dying in this and over the years have worked out a very simple manner to achieve this. I take plastic storage boxes and fill the bottoms with old disused fabric, clothing, sheets or whatever. This prevents puddles of honey forming and provides something for it to soak into. I put metal queen excluders across the tops of the boxes to lay the removed comb on which allows any honey to drip and avoids squashing too many bees. The comb that isn’t used for storing honey is filled with brood in various stages, eggs, larvae and sealed pupae, this I try to leave until I have removed as much comb with honey as I can always cutting carefully with a sharp knife into manageable sections. Of course the comb with honey is very heavy and tears easily when moved out of the vertical.

As much comb with eggs, larvae and sealed pupae as possible is wired into hive frames which are placed either in a ruche, (hive), or a ruchette, (nucleus box or small hive), which is where the colony will hopefully be going for transport. I say hopefully because nothing is ever certain in nature and more than once I have run into to difficulties. These old French houses often have cracks or gaps round the window which lead to cavities in the thick stone walls and some of the bees can sometimes hide with the queen.

Comb containing bee brood in various stages wired into hive frames.

Doug and Malcolm watching the bees while I take a drink

Bees busy fanning pheromones to indicate where the Queen is inside the Ruchette

Once the entire comb has been removed the bees have no where to go. If the queen has already gone in the ruchette with the brood comb the rest of the bees will gradually follow. If she isn’t already in there it’s a case of allowing the bees to form a cluster where the comb was, then putting that cluster in the top of the ruchette. This may have to be repeated until the Queen is in. Once she is in the ruchette can be left on the window ledge under where the comb was and by nightfall the majority of the bees will be in and with the ruchette entrance closed they can be taken away to their new home.

The following morning back in our fields.

A week later when they were put in a full sized hive they had already filled in the gaps in the brood frames, made a huge amount of new comb and filled it with honey and pollen - happy bees.

Chris